430 Coil Cruach Dhosmálta
Cur síos
Sonraíochtaí:
1.Standard: ASTM A240, JIS G4304, EN10088
2. Grád: 200sraith&300sraith&400sraith
3. Tiús: 0.03mm - 6.0mm
4. Leithead: 8mm-600mm
5. Fad: mar iarratas na gcustaiméirí
6. Dromchla: 2D, 2B, BA, Scáthán críochnaithe, N04, Líne Gruaige, bailchríoch Matt, 6K, 8K
7.Teicneolaíocht: fuar tarraingthe / fuar-rollta / rollta te
Eolas bunúsach
Is cruach dhosmálta ferritic ísealcharbóin é Cruach Dhosmálta Cineál 430 a bhfuil, i dtimpeallachtaí beagán creimneach nó neamhchosaintí atmaisféaracha, friotaíocht creimeadh ag druidim le friotaíocht roinnt steels dhosmálta ar a bhfuil nicil.Tá an cóimhiotail seo resistant ocsaídiúcháin ag teochtaí ardaithe.Tá Cineál 430 insínte, ní oibríonn sé crua go héasca, agus is féidir é a fhoirmiú trí úsáid a bhaint as éagsúlacht d'oibríochtaí foirmithe rolla nó lúbthachta stráice éadrom chomh maith leis na próisis líníochta agus lúbthachta níos coitianta.Tá cineál 430 ferromagnetic.
430 Ábhar : Is cruach ilfheidhmeach é 430 cruach dhosmálta le friotaíocht maith creimeadh agus friotaíocht teasa, mar gheall ar a ábhar ard cróimiam, tá friotaíocht creimeadh agus friotaíocht ocsaídiúcháin níos fearr ná 304 cruach dhosmálta, ach tá na hairíonna meicniúla agus an phróiseáiliúlacht 304 cruach dhosmálta níos fearr .
Ideal Do Mhaighnéid : Ní tháirgeann 430 leathán cruach dhosmálta réimse maighnéadach leo féin.Mar sin féin, soláthraíonn siad an t-achar dromchla foirfe do gach cineál maighnéid agus tá siad iontach le haghaidh cur i láthair boird feasachán oifige, pendants maighnéad cuisneáin, maisiúcháin cistine, grianghraif crochta, etc.
Dromchla Smooth : Tá na 430 dromchla cruach dhosmálta uile snasta, dromchla gaineamh-ghainmheach le haghaidh níos mó áilleachta agus solúbthachta, gan aon burrs agus scratches, dromchla glan, fiú tiús agus toisí beachta.
Cosaint dhá thaobh: Tá scannán cosanta ag an dá thaobh den chruach dhosmálta chun scrathadh a chosc le linn pacála agus iompair, rud a d'fhéadfadh cobhsaíocht an táirge a chaomhnú agus a chinntiú níos fearr;Is é an méid 1 Pcs 12” (L) x 12” (W) x 0.0315” (0.80MM)(tiubh).
Ilúsáidí: Úsáidtear cruach dhosmálta 430 go forleathan le haghaidh maisiú ailtireachta, páirteanna dóire breosla, fearais tí, páirteanna fearas tí, deileanna uathoibríocha, boltaí agus cnónna, córais soláthair uisce te, fearais sláintíochta, fearais mharthanacha tí, rothaí eitilte, etc.
Ábhair
| Cineál | Grád | Grád | Comhpháirt Cheimiceach % | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Eile | |||
| Austéinít | 201 | SUS201 | ≤0.15 | 16.00-18.00 | 3.50-5.50 | 5.50 & 7.50 | ≤0.060 | ≤0.030 | - | ≤1.00 | - | ≤0.25 | - |
| 202 | SUS202 | ≤0.15 | 17.00-19.00 | 4.00-6.00 | 7.50-10.00 | ≤0.060 | ≤0.030 | ≤1.00 | - | ≤0.25 | － | ||
| 301 | 1. 4310 | ≤0.15 | 16.00-18.00 | 6.00-8.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | ≤0.10 | - | |
| 304 | 1. 4301 | ≤0.07 | 17.00-19.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 304L | 1. 4307 | ≤0.030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 304H | 1. 4948 | 0.04-0.10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 309 | 1. 4828 | ≤0.20 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 309S | * | ≤0.08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 310 | 1. 4842 | ≤0.25 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.50 | - | - | - | |
| 310S | * | ≤0.08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.50 | - | - | - | |
| 314 | 1. 4841 | ≤0.25 | 23.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | 1.50-3.00 | - | - | - | |
| 316 | 1. 4401 | ≤0.08 | 16.00-18.50 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316L | 1. 4404 | ≤0.030 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | - | - | |
| 316Ti | 1. 4571 | ≤0.08 | 16.00-18.00 | 10.00-14.00 | ≤2.00 | ≤0.045 | ≤0.030 | 2.00-3.00 | ≤1.00 | - | 0.1 | Ti5(C+N)~0.70 | |
| 317 | * | ≤0.08 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 317L | 1. 4438 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0.045 | ≤0.030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - | |
| 321 | 1. 4541 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 | |
| 321H | * | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Ti5(C+N)~0.70 | |
| 347 | 1. 4550 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Nb≥10*C%-1.10 | |
| 347H | 1. 494 | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0.045 | ≤0.030 | - | ≤1.00 | - | - | Nb≥10*C%-1.10 | |
| Déphléacsacha | 2205 | S32205 | ≤0.03 | 22.0-23.0 | 4.5-6.5 | ≤2.00 | ≤0.030 | ≤0.020 | 3.0-3.5 | ≤1.00 | - | 0.14-0.20 | |
| 2507 | S32750 | ≤0.03 | 24.0-26.0 | 6.0-8.0 | ≤1.20 | ≤0.035 | ≤0.020 | 3.0-5.0 | ≤0.80 | 0.5 | 0.24-0.32 | ||
| ferrite | 409 | S40900 | ≤0.03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0.040 | ≤0.020 | - | ≤1.00 | - | ≤0.030 | Ti6(C+N)~0.50 Nb:0.17 |
| 430 | 1Cr17 | ≤0.12 | 16.00-18.00 | - | ≤1.0 | ≤0.040 | ≤0.030 | - | ≤1.0 | - | - | - | |
| 444 | S44400 | ≤0.025 | 17.50-19.50 | 1 | ≤1.00 | ≤0.040 | ≤0.030 | 1.75-2.5 | ≤1.00 | - | 0. 035 | TI+Nb:0.2+4(C+N)~0.80 | |
| Martensite | 410 | 1Cr13 | 0.08-0.15 | 11.50-13.50 | 0.75 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - |
| 410S | * | ≤0.080 | 11.50-13.50 | 0.6 | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 420 | 2Cr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
| 420J2 | 3Cr13 | 0.26-0.35 | 12.00-14.00 | - | ≤1.00 | ≤0.040 | ≤0.030 | - | ≤1.00 | - | - | - | |
| PH | 630 | 17-4PH | ≤0.07 | 15.00-17.50 | 3.00-5.00 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | 3.00-5.00 | - | Nb 0.15-0.45 |
| 631 | 17-7PH | ≤0.09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0.035 | ≤0.030 | - | ≤1.00 | ≤0.50 | - | Al 0.75-1.50 | |
| 632 | 15-5PH | ≤0.09 | 14.00-16.00 | 3.50-5.50 | ≤1.00 | ≤0.040 | ≤0.030 | 2.00-3.00 | ≤1.00 | 2.5-4.5 | - | Al 0.75-1.50 | |
